Innovation / High-efficiency / Sincerity
1. Input signal
Input： 12 way 0～250V Voltage. The input signal is DC OR AC（Frequency 25～75Hz）.Or 12 ways 0～200mA Current。Input signal is DC OR AC （Frequency 25～75Hz）.
Signal processing：16-bit A/D Sampling；Sample rate： 3000 Times/S.Output true valid value
Data update period：Settable；range is 67mS～1.7S，default update time is 1.44S；
Overload capacity：1.2 times of measuring ranges can be measured correcty；Over 2 times of measuring ranges can input 1s, but not damaged.
Isolation：Isolated between signal input and output communication ports, isolation voltage is 000V DC. DATA+、DATA-、VCC、GND are output terminals, common grounding with GND,12 ways signal, input common ground terminal is AGND.
2. Communication output
Ports：RS-485,two-wire system, ±15KV ESD protection
Protocol：MOSBUS-RTU、ASCII and so on
Rate：1200、2400、4800、9600、19200 Bps,can be set by software.
Module add：00～FF can be set by software.
3.Measuring accuracy： 0.2 grade;(Input is 50Hz or DC signal)
4.Module power： +8～24V DC
5.Power：Typical power is45 mA.
6.Work conditions：
Work Temp.：-20℃～70℃;
Storage temp.：-40℃～85℃;
Relative humi.：-5%～95% No condensation
7.Installation：
DIN rail mounted, Size：122mm *70mm * 43mm.
Version by Sunwe Technology Co.,LTD.
No.# MIN.ICP.BEI.06013466-1
Official Wechat Platform
